Product Overview
Bicast Leather Anti Stickiness Care Kit BS.5 by Leather Doctor is a cleaning, rinsing, and pH-balancing system that prevents Bicast leather from becoming sticky.
A: Anti Stickiness system:
A1: Bicast Cleaner 1.5 and Leather Acidifier 2.0 system.
A2: Leather Protector B system.
B: Instruction:
B1: How to Work with Bicast Cleaner 1.5 and Leather Acidifier 2.0 system?
B2: How to work with the Leather Protector B system.
C: People Also Ask:
C1: What is Bicast Leather?
C2: What is a Bicast Leather Sticky Problem?
C3: How a 3-Step Process Solve the Bicast Sticky Issue?
- - -
A: Anti Stickiness system:
A1: Bicast Cleaner 1.5 and Leather Acidifier 2.0 system.
Bicast Cleaner 1.5 is a pH 1.5 balanced leather cleaner to remove body oil grease sweat and harmful cleaners to prevent it from becoming sticky.
Leather Acidifier 2.0 is a pH 2.0 acidifier rinse for controlling, neutralizing, and pH-balancing denaturing leather that bleeds, streaks, getting tacky, or slimy.
A2: Leather Protector B system.
Leather Protector B is a non-stick, rub-resistant conditioner that cuts friction noise and imparts a soft buttery feel on smooth leather.
B: Instruction:
B1: How to Work with Bicast Cleaner 1.5 and Leather Acidifier 2.0 system?
1: Bicast Cleaner 1.5 concentrates in the bottle have to be mixed with distilled water at a ratio of 1: 12 or 1 inch below the top of the bottle before use.
2: Bicast Cleaner 1.5 is applied and brushed with Leather Brush 1 to remove surface soiling and towel extract until the towel shows clean.
3: Acidifier 2.0 concentrates in the bottle have to be mixed with distilled water at a ratio of 1: 25 or 1 inch below the top of the bottle before use.
4: Acidifier 2.0 is applied and brushed with Leather Brush 1 let dwell a few minutes to pH balance potential stickiness and towel extract until the towel shows clean.
5: Let dry, and inspect with hand to check for stickiness, if stickiness has improved and a temporary solution suffices, Protector B may end the temporary problem.
B2: How to work with the Leather Protector B system.
1: Protector B concentrates in the bottle have to be mixed with distilled water at a ratio of 1: 19 or 1 inch below the top of the bottle before use.
2: Apply and spread with a brush/pad and it is ready to use when dry.
3: During routine application, use a lint-free white towel to pick up soiling at the same time.
C: People Also Ask:
C1: What is Bicast Leather?
Bicast or Bycast is split leather with a layer of polyurethane applied to the surface and then embossed.
Bicast, as a result, is a slightly stiffer product that is cheaper than top-grain leather, but it has a much more consistent texture and is easier to clean and maintain.
Bicast furniture exhibits none of the characteristics associated with aniline wax pull-up leather.
With constant use, bicast leather may develop delamination and peel in the often-flexed area.
The seating cushion may also develop splits at weak points.
Exposure to inert gases, body oils, grease, and sweat, as well as body heat, can cause stickiness on urethane finishes.
C2: What is a Bicast Leather Sticky Problem?
The problem with Bicast leather is often described by owners as the finish becoming dull on the seating areas, and any material that comes in contact with it sticking to it.
Bicast finishes feel a bit rubbery, but after five minutes of sitting, clothing becomes stuck to it.
The area that experiences tackiness also exhibits roughness when touched.
When sitting down or standing up, there is a sound of tape being pulled, and a pattern from jeans can be seen on the couch.
If these experiences sound familiar, then Kit B7 or an upsized content with Kit B7 Plus is the answer.
C3: How a 3-Step Process Solve the Bicast Sticky Issue?
