Suede Scent Fatliquor 5.0 Plus

Suede Scent Fatliquor 5.0 Plus by Leather Doctor is an ionic negative (-ve) charged fat and oil conditioner for softening suede with softness and strength.

Fat liquor is the life-blood of Suede! When fat liquor diminishes through aging, dry rotting set in and the suede loose it tensile tear strength and easily rip.

Fat liquor breaks the hydrogen bond when exposed to alkaline toxicity and the suede dried out stiff and shrunk.

Alkaline toxicity is restored with Restorer 1.6 followed by neutralizing and protonating with Acidifier 2.0 to increase the suede ionic positive (+ve) charge with the fat liquor.

Hydrator 3.3 is the pre-conditioner that relaxed the stiff suede fiber preparing for an effective fat liquoring.  

Instruction: 

1: Concentrate is mixed with distilled water 1: 4.8 before use.

2: Apply and redistribute with appropriate brushes until saturation.

3: Repeat each time water contents evaporate leaving behind only the fat and oil content.

4: Allow natural drying for extra softness.

5: The desired suppleness is further staked, massaged, flexed accordingly with a little wet back with Hydrator 3.3 until dry.

People Also Ask:

1: What is Fatliquor?

2: How does Fatliquor work?

3: Why Does Fatliquor Work?

4: When Does Fatliquor Work?

5: What is the Purpose of using Fatliquor?

6: What is the Purpose of Fatliquor?

7: What is the original percentage of leather fatliquor content from the tannery?

8: How does the Fatliquor content of Fat and Oil Diminish?

9: How to determine the Percentage of Fatliquor required by the leather?

10: How to calculate the percentage of fatliquor required?

11: Why is Hydrator 3.3 used before Fatliquor 5.0?

12: What is the ratio of usage between Hydrator 3.3 and Fatliquor 5.0?

13: Tips:

14: Product Reviews 

. . . 

1: What is Fatliquor?

1.1: Fatliquor 5.0 conditioner is a micro-emulsion of fat, oil, and water for rejuvenating, restoring, and softening all types of leather and suede to impart their original suppleness and protect them from dry rotting and stiffness.

2: How does Fatliquor work?

2.1: Fatliquor 5.0 typically works in conjunction with a pre-conditioner like Hydrator 3.3 to relax and open up the fibrous leather structure, ensuring thorough and even absorption of fat and oil.

3: Why Does Fatliquor Work?

3.1: The fat content in Fatliquor 5.0 plumps up the leather, preventing it from easily collapsing into creases and wrinkles during stress or flex.

3.2: The oil content lubricates the fibers, allowing them to slide over one another smoothly like millions of interconnecting hinges.

3.3: Fatliquor 5.0 helps to keep leather at its optimum physical performance and prevent premature aging.

3.4: Fatliquor 5.0 softens the leather when dry, providing stretchability, compressibility, and flexibility while significantly increasing its rip tensile strength.

4: When Does Fatliquor Work?

4.1: When Fatliquor 5.0 is applied, the water-encased molecule breaks free when an ionic attraction occurs between the fat and oil with the leather fiber.

4.2: The excess free water content is wicked out, leaving breathing space for the natural transpiration of the leather.

5: What is the Purpose of using Fatliquor?

5.1: Fatliquor 5.0 carries an ionic negative (-ve) charge to hydrogen bond with the ionic positive (+ve) charge of the leather fibers, thus freeing up pores for better breathability.

5.2: Unlike other stuffing conditioning oils that just fill up the breathing pores.

6: What is the Purpose of Fatliquor?

6.1: Fatliquor 5.0 conditioning is for replenishing the original fat and oil that diminishes through sun bleaching, aging, heat, and alkaline over-exposure or cleaning.

7: What is the original percentage of leather fatliquor content from the tannery?

7.1: Fatliquor content retained after a universal tannery when dries varies by an average of 14% depending on the leather type and its usage.

8: How does the Fatliquor content of Fat and Oil Diminish?

8.1: Fatliquor percentage drops as the fat and oil content diminishes through aging and heat, or when it is leached out by water or chemical overexposure during cleaning.

9: How to determine the Percentage of Fatliquor required by the leather?

9.1: The Fatliquor content required by the leather is based on the weight of the leather to the percentage of remaining fat-liquor.

10: How to calculate the percentage of fatliquor required?

10.1: Fatliquor requirement is simply calculated by the weight difference in percentage.

10.2: If the weight of the leather is 100gm and the leather moisture reading is less than 1%.

10.3: Applying 80gm of Fatliquor 5.0 will deliver a result incremental of 13.3% fatliquor when dry as the 66.6% water content evaporates.

11: Why is Hydrator 3.3 used before Fatliquor 5.0?

11.1: Hydrator 3.3 is used both as a hydrator to relax, open up the inter-fibrillary spaces, and facilitate and redistribute colloidal water movement.

11.2: Besides, protonating it is use to post-clean fatliquor surface remnants.

12: What is the ratio of usage between Hydrator 3.3 and Fatliquor 5.0?

12.1: Hydrator 3.3 to Fatliquor 5.0 ratio practice is 2 to 1, and it works out to be approximately 160gm of Hydrator 3.3 plus 80gm of Fatliquor 5.0 to replenish 100gm dry leather, from less than 1% back to the original tannery up from an average of 14% fatliquor content.

12.2: Fatliquor 5.0 by weight content is comprised of 16.66% ionic negative (-ve) charged fat and oil, encased in 83.33% of water.

12.3: Fatliquor water content that encased the fat and oil molecule in an emulsion suspension when hydrogen bonds with the ionic positive (+ve) leather protein fiber break free and discharge clear from the leather structure to the surface. 

13: Tips:

13.1: Always pre-condition the leather/nubuck/suede with Hydrator 3.3 to relax, and open up the fiber structure before Fatliquor 5.0.

13.2: A fully fatliquor replenished leather maintains an average of 14% fat and oil content, while vegetable-tanned leather is more thirsty.

13.3: Insufficient fat-liquoring (fat and oil) content may remain stiff and may also suffer cracking from staking, massaging, or flexing.

13.4: When crispy dry, prior surface contamination/damages may darken as soiling particulates resurface.

13.5: Removes surface soiling particulates with Eraser 4 for all leathers including nubuck and Eraser 5 for suede.

13.6: Stretching the dark areas lightly will also lighten the appearance.

14: Product Reviews - Posted by Larry Bauman on 31st Jul 2017

14.1: The Lazarus Effect https://leatherdoctor.com/sheepskin-care-kit-sr3/#product-reviews

This product revived my 40-year-old Sheepskin coat that cracked at the touch of it after applying another company's 'Restoration' product. That other product ruined my coat, and I was about to throw it away but took a chance on the Leather Doctor. After applying Hydrator 3.3, I saw an immediate change. I then continued with the Fatliquor 5.0 and was shocked to see the change. My coat is now as soft and supple as it was when I purchased it in 1975! 

Don't even take a chance on valuable leathers with other companies products, this one will amaze you with its results.

Your opinions and insights are precious and will help us to improve our writing to solve your leather problem more efficiently.

Edited October 17, 2024 by Roger Koh.