Product Overview
Leather Doctor Impregnator-26 is formulated for structural weakness on pigmented; semi-aniline and aniline smooth leather types. This is a protein compact resin-blend compound for impregnating worn leather grains and micro cracks. It is to seal, strengthen and leveling out uneven absorption for the further coating process. It fills and tightens with good leveling properties that are film-forming to improve abrasion resistance. This below-surface product is used prior to the above surface Adhesor-73 application.
The size option is available in Fill and Con. Fill is a concentration ratio in the bottle to be cut/mix and fills with distilled water prior to use to save on shipping. The Con is concentrated to be cut with distilled water at a ratio of 1: 2 prior to use.
Instruction:
1 - Shake well, horsehair Brush-1 to saturate all weak, overstretched and highly absorbent damaged areas.
2 - Concentrate on weak areas otherwise wipe off unnecessary excess to prevent build-up.
3 - Sand off surface excess when dry with 1000/2000grit sandpaper.
The size option is available in Fill and Con. Fill is a concentration ratio in the bottle to be cut/mix and fills with distilled water prior to use to save on shipping. The Con is concentrated to be cut with distilled water at a ratio of 1: 2 prior to use.
Instruction:
1 - Shake well, horsehair Brush-1 to saturate all weak, overstretched and highly absorbent damaged areas.
2 - Concentrate on weak areas otherwise wipe off unnecessary excess to prevent build-up.
3 - Sand off surface excess when dry with 1000/2000grit sandpaper.
