Leather Crosslinker 64

Leather Doctor®

(No reviews yet) Write a Review
$47.95
SKU:
C25
Weight:
0.055 KGS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Product Overview

Leather Crosslinker 64 by Leather Doctor is a hardener that strengthens tacky, sticky topcoats, creating a toughened film that improves durability.

Crosslinker 64 is high-solid without the VOC that also ties up some hydrophilic elements to eliminate water spotting and sticky topcoats.

How to Use Crosslinker 64?

1: The use by weight ratio is 1: 95.

2: Add 2.5gm to 8oz of ready to use topcoat.

3: Add Crosslinker into the Topcoat while stirring to avoid seeding

4: Stir, swirl or shake well for 2-3 minutes to ensure proper mix.

5: Allow the mixture to react for a minimum of 30 minutes before using.

6: This will ensure optimum catalyst reaction time and flow/leveling performance of the coating during brush or airbrushing.

7: After 48 hours, it is recommended to re-cross-link the top coat.

8: The mix is transferred to the foam brush and applied in a light circular motion to avoid streaks on the prep surface and blow dry.

9: Subsequent coatings are applied until the desired gloss is achieved and let overnight dry for curing time.

10: Allow at least 48 hours for a complete curing time before use.

11: The average of 3 coatings of 8oz Bicast Gloss Topcoat 76G mix covers approximately 80 square feet.

Updated Jun 26, 2024 by Roger Koh

Reviews

(No reviews yet) Write a Review