Leather Aniline Gum Stain Remover - Kit-A3.gs

Leather Doctor®

(No reviews yet) Write a Review
0.800 KGS
Calculated at Checkout
Adding to cart… The item has been added

Product Overview

Leather Doctor® Kit-A3.gs, aniline leather gum stain remover kit is designed to remove gum related and other sticky substances. Leather Eraser-4, a foam rubber sponge eraser is used in conjunction with the penetrating, lubricating and suspending power of the Prep-4.4. Sticky residue is cleaned and rinsed with Clean-3.8 and follows with Rinse-3.0. When leather is wet and dry again, it tends to be stiffer. Hydrator-3.3 relaxes stiff leathers and reduces surface tension prior to fat and oil replenishing for an even appearance. Fatliquor-5.0 rejuvenates leather for suppleness when dry. Protector-B+ enhances a non-stick rub-resistant protection with a buttery-feel that shield against sticky soiling. Note that the mentioned products suffix numbers denotes its pH value for a safer gum related stain removing process to pH sensitive leather.


Gum Stain Removal
1. Apply Prep-4.4 and let dwell 10 to 30 minutes prior to traction agitation with leather Eraser-4.
2. Towel extracts suspended soiling until it shows clean.
3. Sticky residue is clean and rinse with Clean-3.8 follows by Rinse-3.0 and towel extracts until it shows clean.
4. Leave the leather to dry for an inspection.

1. Hydrator-3.3 is applied to plumps the leather and prepares the surface for an even appearance prior to fat and oil replenishing.

Fat and Oil Replenishing
1. Spray Fatliquor-5.0 and redistribute evenly with foam brush until fully saturated.
2. Repeat reapplication when water content evaporates until fully saturated.
3. Let natural dry for extra softness and wick up soiling particulates is erases with Eraser-4 when crispy dry.

Rub-Resistant Protection
1. Mist sprays Protector-B+, redistribute with a paper towel and ready for use when dry.

Kit Content and Product Description:

Leather Doctor® Prep-4.4 (60ml)
This is the leather-safe milder version of Prep-7.7 with a pH value of 4.4. Its high viscosity is designed to be painted on neatly with a foam brush onto the leather. It works by allowing sufficient dwell-time to penetrate, lubricate and suspense soiling prior to towel extraction.

Leather Doctor® Cleaner-3.8 (250ml)
This is a leather-safe pH 3.8 cleaner for removing Prep-7.7 sticky residue.

Leather Doctor® Rinse-3.0 (250ml)
This is a leather-safe pH 3.0 rinse to neutralize alkalinity and remove all traces of cleaning residue to a healthy squeaky-feel.

Leather Doctor® Hydrator-3.3 (250ml)
This is a waterbased pH 3.3 leather-safe hydrator with active surfactantcy for lowering the interfacial tension. It is for hydrating dried, stiffed or shrunk leathers to separates the crushed, stick together fibrils and relaxes them. It is for charging the leather protein fibers below its iso-electric point positive for long lasting hydrogen bond with the ionic negative charged Fatliquor-5.0. It is for facilitating colloidal water movement within the leather structure during the wicking process to move soiling particulates to the surface.

Leather Doctor® Fatliquor-5.0 (250ml)
This is a pH 5.0 anionic charged micro emulsion fatliquor to season and rejuvenate leather with softness, suppleness and strength. It is for replenishing original fat and oil that diminishes thru sun-tanning, ageing, heat and alkaline exposure or cleaning. It penetrates and lubricates the leather fibers so that after drying they will be capable of sliding over one another smoothly. It softens the leather with stretchability, compressibility and flexibility, while enhancing its rip tensile strength greatly. It relaxes coarse breaks, creases and wrinkles enhance suppleness and prevent cracking. It helps to keep leather at its optimum physical performance and prevent premature ageing.

Leather Doctor® Protector-B+ (120ml)
This is a leather scented, non-film forming, non-stick, rub-resistant protector that impart a natural buttery-feel. Its non-stick breathable barrier is essentially to shield the detrimental effects of sticky soiling. Its natural buttery-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion. It reduces friction squeaks that wear the finishes during used.

Leather Brush-1 (1pc)
This horsehair detailing brush is designed ergonomically to be an extension of our hand with a sturdy grooved grip. It is designed to produce effective result easily and efficiently. It is recommended for all smooth leather for a soft and scratch-free cleaning. Its length is 7 inches with a three-row bristle 1½ inches cleaning head.

3 inch Poly-Brush (1 pc)
This is a dense foam that resists tearing and shredding and carries more material. It has a solid wood handle that allows greater control for quality results. It is used for controlling and spreading fatliquor for a more even distribution.

Paper Towel Rags (5 pc)
This rag works like cloth, lint free, highly absorbent and washable. General application is for extracting suspended soiling or for spreading hydrator, fatliquor or protector. It is used for both dye and topcoat padding for smooth leathers.


(No reviews yet) Write a Review