Leather Primer Adhesor 73

Leather Primer Adhesor 73 by Leather Doctor is a compact resin primer designed to smooth, seal, and enhance adhesion before color coating.

It effectively builds a uniform surface over rough or abraded areas on all smooth leathers. Additionally, Adhesor 73 assists in removing deteriorated finishes, repairing abraded surfaces, and reactivating aniline dyestuff to some extent.

People Also Ask:

1. How to Strip Clean Leather Surface before Adhesor 73?
2. How to Remove Deteriorating Leather Grain with Adhesor 73?
3. How to Repair Abraded Surface with Adhesor 73?
4. How to repair a Heavy Abrasion and Opening Flap?
5. How to repair a Stick-out Flap, Rip or Tear?
6. How to Activate Aniline Dyestuff with Adhesor 73?
7. How to Ensure Proper Sealing and Adhesion with Adhesor 73?

1. How to Strip Clean unwanted Leather Surfaces before Adhesor 73?

1. Unwanted finishes are stripped with Stripper 2.3 and rinsed off with Rinse 3.0 accordingly.
2. Test for after-drying satisfying darkening effect before actual Adhesor 73 application.

2. How to Remove Deteriorating Leather Grain with Adhesor 73?

1. Deteriorating leather grains are removed by Adhesor 73 and working with Strip Brush 9, scouring white pad, and optional fine 1500/2000grit sanding as appropriate and wiping until the white lint-free towel shows clean.

3. How to Repair Abraded Surface with Adhesor 73?

1. Abraded surfaces are repaired with Adhesor 73 direct application with appropriate brush, and wipe off excess.
2. A heavier abraded surface repairs will require Leather Abrasion Repairer R4.
3. Let dry naturally or speed dry with a blow dryer.
4. When almost dry compress the abraded surface with a smooth spatula.

4. How to repair a heavy abrasion and opening flap?

1. A heavy abrasion repair requires Leather Abrasion Repairer R4.

5. How to repair a stick-out flap, rip or tear?

1. A stick-out flap, rip or tear repair need Leather Glue 3D

6. How to Activate Aniline Dyestuff with Adhesor 73?

1. Adhesor 73 is applied to the affected areas and wiped clean to improve appearance.
2. Darkening areas are stretched to lighten with a smooth spatula or spoons.
3. Surface build-up is removed with 1000/2000 grit sandpaper.

7: How to Ensure Proper Sealing and Adhesion with Adhesor 73?

1. Ensure proper sealing and adhesion with Adhesor 73 by spreading evenly with Leather Brush 1 or a white 3M scouring pad to work into grooves and worn areas, the excess is wiped away with a lint-free towel or until the towel shows clean.
2. Let dry naturally or speed dry with a blow dryer.
3. Darkening areas are stretched with a smooth spatula or spoons to improve appearance.

Edited: March 24, 2025 by Roger Koh