Product Overview
Leather Aniline Tarnish-Stain Remover - Kit-A5.hs by Leather Doctor is designed to remove practically most stains that derive from metal including the rusty stain after the protein component of the blood is removed. d’Tarnish-1.3 works by chemical reaction dwelling with a paper towel until it is naturally dry for the product to take effect. Basifier-8.8 neutralizes the low pH with the same dwelling technique and repeat to let dry naturally as well. Hydrator-3.3 relaxes stiff leather and reduces surface tension for an even appearance prior to fat and oil replenishing. Fatliquor-5.0 replenishing rejuvenates the leather structure for suppleness when dry. Protector-B+ enhances a non-stick rub-resistant protection with a buttery-feel that shield against sticky soiling. Note that the mentioned products suffix numbers denotes its pH value in this holistic approach to removing tarnish stains from aniline leathers.
Instruction
Stain Removal
1. Apply d’Tanish-1.3 onto the stain, agitate with horsehair Brush-1 and towel extract until it shows clean.
2. Soak the remaining stain with a saturated paper towel until natural dry for the product reaction.
3. When the stain vanished, neutralize with Basifier-8.8 by applying and letting it dwell until natural dry.
Hydrating
1. Hydrator-3.3 is applied to plumps the leather and prepares the surface for an even appearance prior to fat and oil replenishing.
Fat and Oil Replenishing
1. Spray Fatliquor-5.0 and redistribute evenly with foam brush until fully saturated.
2. Repeat reapplication when water content evaporates until fully saturated.
3. Let natural dry for extra softness and wick up soiling particulates is brushed when crispy dry.
Rub-Resistant Protection
1. Mist sprays Protector-B+, redistribute with a paper towel and ready for use when dry.
Kit Content and Product Description:
Leather Doctor® d’Tarnish-1.3 (30ml)
This is a waterbased pH 1.3 leather tarnish remover. It is for removing metallic stains like rust and tarnish.
Leather Doctor® Basifier-8.8 (250ml)
This is a waterbased pH 8.8 mild leather basifier. It is to neutralize strong acidic exposure especially after d’Tarnish-1.3.
Leather Doctor® Hydrator-3.3 (250ml)
This is a waterbased pH 3.3 leather-safe hydrator with active surfactantcy for lowering the interfacial tension. It is for hydrating dried, stiffed or shrunk leathers to separates the crushed, stick together fibrils and relaxes them. It is for charging the leather protein fibers below its iso-electric point positive for long lasting hydrogen bond with the ionic negative charged Fatliquor-5.0. It is for facilitating colloidal water movement within the leather structure during the wicking process to move soiling particulates to the surface.
Leather Doctor® Fatliquor-5.0 (250ml)
This is a pH 5.0 anionic charged micro emulsion fatliquor to season and rejuvenate leather with softness, suppleness and strength. It is for replenishing original fat and oil that diminishes thru sun-tanning, ageing, heat and alkaline exposure or cleaning. It penetrates and lubricates the leather fibers so that after drying they will be capable of sliding over one another smoothly. It softens the leather with stretchability, compressibility and flexibility, while enhancing its rip tensile strength greatly. It relaxes coarse breaks, creases and wrinkles enhance suppleness and prevent cracking. It helps to keep leather at its optimum physical performance and prevent premature ageing.
Leather Doctor® Protector-B+ (120ml)
This is a leather scented, non-film forming, non-stick, rub-resistant protector that impart a natural buttery-feel. Its non-stick breathable barrier is essentially to shield the detrimental effects of sticky soiling. Its natural buttery-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion. It reduces friction squeaks that wear the finishes during used.
Leather Brush-1 (1pc)
This horsehair detailing brush is designed ergonomically to be an extension of our hand with a sturdy grooved grip. It is designed to produce effective result easily and efficiently. It is recommended for all smooth leather for a soft and scratch-free cleaning. Its length is 7 inches with a three-row bristle 1½ inches cleaning head.
3 inch Poly-Brush (1 pc)
This is a dense foam that resists tearing and shredding and carries more material. It has a solid wood handle that allows greater control for quality results. It is used for controlling and spreading fatliquor for a more even distribution.
Paper Towel Rags (5 pc)
This rag works like cloth, lint free, highly absorbent and washable. General application is for extracting suspended soiling or for spreading hydrator, fatliquor or protector. It is used for both dye and topcoat padding for smooth leathers.