Vachetta Leather Tarnish Stain Remover - Kit-V5.hs is formulated to remove practically most stains that derive from metal including the rusty stain after the protein component of the blood is removed.
-
LeatherTarnishRemover-1.3 works by redox (reduction-oxidation) chemical reaction and lightens up the tarnish stain to take effect when dry.
-
Due to the tarnish remover low pH value of 1.3, it has to be pH balanced with a pH 8.8 leather basifier to bring the pH value back to its pH neutral of 3 - 5 with LeatherBasifier-8.8. Hydrating to relax the leather is performed with LeatherHydrator-3.3.
-
It relaxes stiff leather and reduces surface tension for an even appearance prior to fat and oil replenishing.
-
Fatliquoring is performed with LeatherFatliquor-5.0 to replenishes and rejuvenates the leather structure for softness and suppleness when dry.
-
LeathetrProtector-D imparts a rub resistant draggy-feel against friction rubs and shield against sticky soiling while prolonging the appearance of the leather longer.
-
This kit comes with reduced shipping weight, thus all concentrates in the bottles have to be mix/cut with distilled water prior to use.
Instruction
Stain Removal System:
1- Apply LeatherTanishRemover-1.3 onto the stain, agitate with horsehair Brush-1 and towel extract until it shows clean.
2- Let to natural drying for redox chemical reaction to take place.
3- Repeat application and drying until the stain disappear satisfactorily.
pH Balancing System:
1- LeatherBasifier-8.8 is applied to the stain removal area and feather out to pH balance the low pH value of 1.3 from the tarnish remover.
2- Rinse extract the tarnish remover residue until towel shows clean and continue with the hydrating process.
Hydrating System:
1- LeatherHydrator-3.3 is applied to plumps the leather and prepares the surface for an even appearance prior to fat and oil replenishing.
2- Excess moisture is extracted with a dry terry cotton towel or Towel-5 and continue with the fatliquoring process.
Fatliquoring System:
1- Apply LeatherFatliquor-5.0 and redistribute evenly with foam brush until the leather is fully saturated.
2- Repeat reapplication when water content evaporates until fully saturated again.
3- Let natural dry for extra softness and wick up soiling particulates is towel extracted.
Sticky Residue Removal System:
1- Sticky surface residue is remove with LeatherHydrator-3.3 spraying and towel extraction until surface milky appearance turns clear.
2- The leather is let to slow drying and massaging to dry for extra softness.
Rub-Resistant Protection
1- Mist sprays LeatherProtector-D foam brush or paper towel redistribute it and is ready for use when dry.
Edited on February 13, 2020.