Absorbent Leather Anti-Urine 4.2

Absorbent Leather Anti-Urine 4.2

Post-Restoration Urine Odor Treatment for Absorbent & Porous Leather

Leather Doctor® Absorbent Leather Anti-Urine 4.2 is a specialized pH 4.2 post-restoration treatment developed for absorbent and porous leather affected by urine contamination and persistent urine odor.

Unlike a pre-cleaner or initial urine extraction product, Anti-Urine 4.2 is used at the final deodorizing stage of the absorbent-leather treatment process, after the appropriate urine-treatment pathway has been completed, Fatliquor 5.0+ has replenished the leather fiber structure, and the fatliquored leather has completely dried.

It completes the Leather Doctor® absorbent-leather urine treatment system by addressing residual urine odor following the restorative treatment process.

Its application follows the identified urine contamination pathway rather than being restricted to the visible stain or strongest odor location.

The treatment has to follow the path of the urine.

Developed for Absorbent Leather

Anti-Urine 4.2 is intended for absorbent and porous leather surfaces, including:

• Aniline leather
• Semi-aniline leather
• Suede
• Nubuck
• Vachetta
• Vegetable-tanned (Veg-Tan) leather
• Hair-on hide
• Other absorbent or porous leather

A leather originally manufactured with a protective finish may also become absorbent through micro-crazing, creases, cracks, or deterioration of its topcoat.

When urine has penetrated through a deteriorated protective surface and the affected area has become absorbent, the absorbent-leather treatment pathway may be appropriate.

For protected, non-absorbent leather, use Non-Absorbent Leather Anti-Urine 4.5.

Why Anti-Urine 4.2?

1. Leather-Safe™ pH 4.2

Formulated at pH 4.2, within Leather Doctor®'s Leather-Safe™ Zone of pH 3.0–5.0.

2. Post-Restoration Deodorizing

Designed for the final urine odor treatment stage following the selected urine-decontamination pathway and leather restoration.

3. Deep-Path Application

Urine contamination may extend beyond the visible surface and travel through seams, crevices, cushion edges, and other absorbent areas.

Anti-Urine 4.2 is applied along the identified contamination pathway, including the affected absorbent leather panel.

4. Controlled Whole-Panel Application

The affected leather panel is treated evenly from seam to seam instead of creating isolated wet spots.

This is especially important for light- and medium-colored absorbent leather, where isolated wetting can produce visible rings, halos, or tide lines during drying.

Three Absorbent Leather Urine-Treatment Pathways

The correct treatment pathway depends on the condition of the urine contamination.

Leather Doctor® distinguishes three treatment pathways:

Path 1 — Fresh Urine

For fresh urine contamination requiring the Fresh Urine treatment pathway.

Path 2 — Ammonia

For urine contamination requiring the Ammonia treatment pathway.

Path 3 — Mercaptan

For urine contamination requiring the Mercaptan treatment pathway.

These are three distinct treatment approaches, not interchangeable product names or a single universal cleaning sequence.

Select the appropriate pathway according to the contamination condition and follow its specific treatment instructions.

Anti-Urine 4.2 is positioned after the selected pathway and subsequent leather restoration, not as the initial treatment for these three conditions.

Part of the Leather Doctor® Absorbent Leather Treatment System

Common Pre-Cleaning

Degreaser 4.4 → Rinse 4.4

Removes accessible surface contamination, oily deposits, and cleaning residues before proceeding with the selected urine-treatment pathway.

Select One of Three Urine-Treatment Pathways

Path 1: Fresh Urine

Path 2: Ammonia

Path 3: Mercaptan

Follow the specific instructions for the selected pathway.

Leather Restoration

Hydrator 3.5 → Fatliquor 5.0+

Hydrator 3.5 — Structural Relaxation

Hydrator 3.5 provides temporary wetting to relax the leather fiber structure and prepare it for effective fatliquoring.

It is not a leather moisturizer and does not replenish the lost fat and oil lubricants.

Fatliquor 5.0+ — Fiber Lubrication Restoration

Fatliquor 5.0+ replenishes fat and oil lubricants within the leather fiber structure, helping restore flexibility, softness, and suppleness.

The '+' formulation also imparts a classic leather scent.

Complete Drying Before Anti-Urine 4.2

Allow the fatliquored leather to dry completely before proceeding.

This is an essential sequence requirement. Anti-Urine 4.2 must not be applied before Fatliquor 5.0+ has completely dried.

Final Deodorizing Treatment

Absorbent Leather Anti-Urine 4.2

Apply Anti-Urine 4.2 after the complete drying of Fatliquor 5.0+ as the final urine odor treatment stage.

Final Surface Finishing

Matching Topcoat, when required → Conditioner 3.2+

If the original topcoat has deteriorated or requires refinishing, apply the appropriate matching topcoat before final conditioning.

Conditioner 3.2+ completes the surface conditioning stage, imparting a soft, smooth leather feel and classic leather scent.

Correct Treatment Sequence at a Glance

Common Pre-Cleaning:

Degreaser 4.4 → Rinse 4.4

Select One Treatment Pathway:

Fresh Urine OR Ammonia OR Mercaptan

Leather Restoration:

Hydrator 3.5 → Fatliquor 5.0+

Complete Drying:

Allow Fatliquor 5.0+ treated leather to dry completely.

Final Deodorizing:

Anti-Urine 4.2

Finishing:

Matching Topcoat, when required → Conditioner 3.2+

How to Apply Anti-Urine 4.2

1. Complete the Previous Treatment Stages

Before applying Anti-Urine 4.2, confirm that:

• The affected leather has completed the appropriate Fresh, Ammonia, or Mercaptan treatment pathway.

• Hydrator 3.5 has completed its structural relaxation function.

• Fatliquor 5.0+ has replenished the leather fiber lubricants.

• The fatliquored leather has completely dried.

Do not substitute Anti-Urine 4.2 for the earlier urine extraction or condition-specific treatment stages.

2. Inspect the Urine Pathway

Identify the affected leather panel and trace the extent of contamination.

For upholstered furniture, inspect:

• Cushion seams and edges

• Crevices

• Underside of cushions

• Bottom of the sofa or chair

• Dust cloth

• Wooden frame or structural rails

• Other areas along the identified urine pathway

A UV black light may help reveal fluorescent traces associated with urine contamination.

3. Apply Anti-Urine 4.2

• Apply using a controlled, even application technique.

• Follow the identified urine pathway.

• Wet the affected leather panel evenly from seam to seam.

• Do not restrict application to the visible stain or strongest odor spot.

• Avoid isolated wetting, particularly on light- and medium-colored absorbent leather.

The leather may temporarily darken during wetting. This is normal for absorbent leather.

4. Allow Natural Drying

Allow the treated leather to air dry naturally in a well-ventilated room.

A typical drying period is 24–48 hours, depending on application volume, leather characteristics, and environmental conditions.

Do not use a hair dryer, radiator, or other direct heat source.

5. Evaluate the Result

After drying, evaluate the leather for remaining urine odor and inspect the surrounding materials.

Persistent odor may indicate that the original contamination extended beyond the leather into cushion foam, batting, backing, dust cloth, or structural materials.

The remaining contamination source must be identified and treated appropriately.

Treatment Volume Matters

Anti-Urine 4.2 should be applied in sufficient volume to follow the identified urine contamination pathway.

A small amount applied only to the visible surface may not be sufficient when residual urine contamination extends deeper into absorbent leather.

The required treatment volume depends on:

• Estimated original urine volume

• Depth of penetration

• Distribution of contamination

• Leather absorbency

• Previous treatment history

Treat the contaminated pathway rather than simply treating the visible stain.

Special Consideration for Light and Medium-Colored Leather

Absorbent leather may darken temporarily when wetted.

Treating only a small isolated area may create a difference between wet and dry leather, producing visible rings, halos, or tide lines during drying.

For this reason:

• Treat the affected panel evenly.

• Avoid isolated wet spots.

• Test first in an inconspicuous area.

• Allow natural drying before evaluating the final appearance.

The objective is controlled, even panel wetting.

When Urine Odor Remains

Persistent odor after completing the leather treatment may indicate that urine has penetrated beyond the leather itself.

Inspect for contamination within:

• Cushion foam

• Batting

• Backing materials

• Dust cloth

• Wooden structural components

• Other absorbent upholstery materials

Treating the leather alone may not eliminate odor originating from contaminated internal materials.

Return to the original urine pathway and identify the last trace of contamination.

Follow the urine path. Reach the last trace. Treat the contamination. Restore the leather.

 Important Precautions

• Always test first in an inconspicuous area.

• Determine the affected leather's present absorbency before selecting the Anti-Urine treatment.

• Use Anti-Urine 4.2 for absorbent leather.

• Use Anti-Urine 4.5 for protected, non-absorbent leather.

• Complete the selected Fresh, Ammonia, or Mercaptan treatment pathway.

• Complete the Hydrator 3.5 and Fatliquor 5.0+ restoration stages before applying Anti-Urine 4.2.

• Allow Fatliquor 5.0+ to dry completely before the final Anti-Urine treatment.

• Avoid isolated wetting on light- and medium-colored absorbent leather.

• Do not force-dry with direct heat.

• Inspect internal upholstery materials when odor persists.

Technical Specifications

Product Name: Absorbent Leather Anti-Urine 4.2

Product Function: Post-Restoration Urine Odor Treatment

Application: Final deodorizing treatment following absorbent-leather urine decontamination and restoration.

pH: 4.2

Compatibility:

Aniline • Semi-Aniline • Suede • Nubuck • Vachetta • Vegetable-Tanned Leather • Hair-on Hide • Other Absorbent and Porous Leather

Formulation: Leather-Safe™ pH 4.2

Action: Urine Odor Neutralizing Treatment

Free From: Isopropyl alcohol and aggressive solvents.

Packaging & Preparation

Ready-to-Use (RTU):

• 2 oz — Ready for direct application

• 4 oz — Ready for direct application

• 8 oz — Ready for direct application

Concentrate-to-Fill (CTF):

• 16 oz — Add distilled water to the specified final fill volume.

• 32 oz — Add distilled water to the specified final fill volume.

RTU products do not require dilution. For CTF products, follow the bottle's specified final fill instructions.

Part of the Leather Doctor® Anti-Urine System

Absorbent Leather — Anti-Urine 4.2

Degreaser 4.4 → Rinse 4.4 → Select Fresh, Ammonia, or Mercaptan Treatment Pathway → Hydrator 3.5 → Fatliquor 5.0+ → Complete Drying → Anti-Urine 4.2 → Matching Topcoat, when required → Conditioner 3.2+

Protected / Non-Absorbent Leather — Anti-Urine 4.5

Non-Absorbent Leather Foam Cleaner 6.5 → Non-Absorbent Leather Stabilizer Rinse 5.0 → Non-Absorbent Leather Anti-Urine 4.5 → Non-Absorbent Leather Anti-Urine 4.5 Post Rinse 6.0 → Matching Topcoat, when required → Conditioner 3.2+, as appropriate.

Two different leather behaviors. Two specialized Anti-Urine treatments. One Leather-Safe™ treatment philosophy.

---