Restoration Hardware Wax Pull-Up Leather Urine Odor Killer Kit RW5.uk

Leather Doctor®

(No reviews yet) Write a Review
$173.95
SKU:
Kit RW5.uk
Weight:
0.840 KGS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Product Overview

Restoration Hardware Wax Pull-Up Leather Urine Odor Killer Kit RW5.uk by Leather Doctor clean, rinse, pH balance, deodorize, hydrate, fatliquor, condition, & protect.

People Also Ask:

1: What is Urine Contamination on Leather?
2: How to Decontaminate Urine on Leather?
3: How to do a Restoration Cleaning with Leather Urine Cleaner 1.5 and Leather Acidifier 2.0?
4: How to Deodorize with Leather Urine Odor Remover 2.1?
5: How to Hydrate with Leather Hydrator 3.3?
6: How to Fatliquor with Leather Fatliquor 5.0?
7: How to Condition with Aniline Leather Rejuvenator Wax Pull Up 8.6?
8: How to Protect with Leather Scent Protector B Plus?

1: What is Urine Contamination on Leather?

1.1: Urine contamination on leather is detectable with its characteristic ammonia odor.

1.2: Tanning agent may surface as streaking dark stains and becomes tacky as the urine ages.

1.3: Fatliquor may surface as cloudy spew.

1.4: Ammonia odor may indicate the shifting of the leather's pH neutral from 4 to 10.

1.5: When wet finger testing it, the leather may likely turn sticky or slimy.

1.6: This sticky feeling is leather denaturing and reverting to rawhide.

2: How to Decontaminate Urine on Leather?

2.1: Urine Decontamination on leather is performed holistically through a sequence of processes that include: Restoration Cleaning, Urine Treatment, Hydrating, Fatliquoring, Pull-Up Rejuvenating and Protection.

3: How to do a Restoration Cleaning with Leather Urine Cleaner 1.5 and Leather Acidifier 2.0?

3.1: Surface stain is removed by Urine 1.5.

3.2: Suspended residue is rinsed and tackiness is stabilized by Acidifier 2.0.

3.3: Absorbed stains are removed from both sides accordingly.

3.4: Surface stain is towel extracted and remaining soiling is removed with Urine 1.5 in conjunction with horsehair Brush 1 and towel extraction until the towel shows clean.

3.5: The remaining residue is rinsed off with Acidifier 2.0 in conjunction with brushing and towel extraction until the towel shows clean.

3.6: Absorbent towels are placed on both sides during extraction to reduce abrasion to the surface and stain is absorbed on the reverse side.

3.7: The surface is detected for any tackiness and should return to a healthy squeaky feel once the leather is well pH balanced with further dwelling.

3.8: Continue the wet process with deodorizing.

4: How to Deodorize with Leather Urine Odor Remover 2.1?

4.1: Urine 2.1 works by chemical reaction.

4.2: Urine 21 is applied and soaked until naturally dry.

4.3: The sour odor dissipates when the solution is completely dried.

4.4: Inspect for satisfaction otherwise repeat as necessary.

5: How to Hydrate with Leather Hydrator 3.3?

5.1: Hydrator 3.3 first step is to achieve a deep penetration to help purge out foreign contamination to be towel extracted and is repeated until the towel shows clean.

5.2: This penetrated stain-removing process continues with hydrating until complete satisfaction during a dry inspection.

5.3: Hydrator 3.3 second step is to relax stiff leather and redistribute the migrating leather constituents, it is applied to the entire section without a dry edge, towel extracted, and ready for fatliquoring.

6: How to Fatliquor with Leather Fatliquor 5.0?

6.1: Fatliquor 5.0 is applied, brushed, and distributed until the leather is saturated.

6.2: Continuous application is repeated each round water contents evaporate until saturation.

6.3: The leather is left for natural drying for extra softness.

6.4: The darkening effect is stretched with a spoon to lighten up.

7: How to Condition with Aniline Leather Rejuvenator Wax Pull Up 8.6?

7.1: Aniline Leather Rejuvenator Wax Pull Up 8.6 is applied, spread evenly, and saturated sufficiently with a horsehair brush to produce a darkening effect.

7.2: Allow at least 8 hours of natural drying time or until crystalline is apparent.

7.3: The wax deposit is activated with a heat blower or hairdryer to a natural gloss luster.

8: How to Protect with Leather Scent Protector D Plus

8.1: Protector D Plus is applied by mist spray and spread with a paper towel.

8.2: Leather is ready to use when dry.

Your opinions and insights are precious and will help us to improve to solve your leather problem more efficiently.

Created June 29, 2024 by Roger Koh

Reviews

(No reviews yet) Write a Review