Hair on Hide Glue Repair Kit G7

$21.95

(No reviews yet) Write a Review

Weight:

0.250 KGS

Shipping:

Calculated at Checkout

Description

Hair-On Hide Glue Repair Kit G7 by Leather Doctor® is a Hair-On-Hide-Safe™ repair system designed to restore rips and tears without stiffening the hide.

Kit G7 features a water-based, flexible, soft-compact resin adhesive paired with a 24 sq. in. (0.4 mm thick) genuine lambskin repair patch, ideal for reinforcing damaged areas from the underside.

Formulated specifically for hair-on cowhide, sheepskin, and natural hide rugs, the adhesive bonds securely while remaining elastic, preserving the hide’s natural drape, flexibility, and hair movement. The thin lambskin sub-patch provides strong structural support without creating ridges, hard spots, or visible repair lines.

Key Features & Benefits

Hair-On-Hide-Safe™ Adhesive – Flexible, water-based resin glue that dries soft and natural
Invisible Structural Repair – Reinforces rips and tears from beneath the hide
Genuine Lambskin Patch – 24 sq. in., ultra-thin 0.4 mm for seamless integration
No Stiffening or Hair Loss – Maintains natural softness, flexibility, and hair flow
Ideal for Hair-On Rugs & Hides – Suitable for cowhide, sheepskin, and hair-on leather décor

Typical Uses

Repairing rips, tears, and splits in hair-on hide rugs.
Reinforcing weakened stress areas from the underside.
Restoring structural integrity without altering appearance or feel.

Hair-On Hide Rip & Tear Repair Instructions

(Using Hair-On Hide Glue Repair Kit 2G by Leather Doctor®)

Before You Begin:

Perform repairs from the suede/flesh side only
Never apply glue to the hair side
Work on a clean, dry, flat surface

1️⃣ Step 1 – Clean the Repair Area (If Needed)

Lightly clean the suede/flesh side surrounding the rip to remove dust, oils, or residues that may interfere with adhesion.
Allow the area to dry completely before proceeding.

Leather Doctor® Principle: Clean bonding surfaces ensure maximum adhesive strength.

2️⃣ Step 2 – Prepare the Tear

Align the torn edges so they meet naturally without overlapping or forcing tension.
Trim loose fibers on the suede side only if necessary.

Tip: A relaxed, well-aligned tear results in an invisible repair from the hair side.

3️⃣ Step 3 – Cut and Position the Lambskin Patch

Cut the 0.4 mm lambskin patch so it extends at least ½ inch (12 mm) beyond the tear on all sides.
Test-fit the patch beneath the tear to confirm full coverage and flat contact.

Leather Doctor® Principle: Thin, flexible sub-patching prevents ridges and stiffness.

4️⃣ Step 4 – Apply Glue

Apply an even coat to:

The suede side of the lambskin patch
The hide side edges of the tear

Allow the adhesive to become tacky (partially dry) before bonding.

5️⃣ Step 5 – Bond the Patch

Insert the lambskin patch beneath the tear and press firmly so the torn edges meet naturally.
Work from the center outward to remove air pockets and ensure full contact.

Apply light pressure and hold in place until the bond sets.

6️⃣ Step 6 – Dry and Relax

Allow the repair to dry naturally.
Do not stretch, fold, or stress the area during drying.

Optional: Gentle airflow may be used to speed drying, but avoid heat.

7️⃣ Step 7 – Groom the Hair Side

Once fully dry, gently brush or hand-separate the hair fibers on the grain side to restore natural hair flow and conceal the repair.

Result: A soft, flexible, structurally reinforced repair with no visible glue lines.

After-Care Notes

Avoid vacuuming or aggressive handling over the repaired area for 24 hours
Normal use can resume once the adhesive has fully cured
For weakened hides, future preventive reinforcement from the hide side is recommended

Leather Doctor® System Advantage