Skip to main content
Image coming soon

Hair on Hide Glue Repair Kit G7

$21.95
(No reviews yet) Write a Review
Weight:
0.180 KGS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

 

Hair-On Hide Glue Repair Kit G7 by Leather Doctor® is a Hair-On-Hide-Safe™ repair system designed to restore rips and tears without stiffening the hide.

  • Kit G7 features a water-based, flexible, soft-compact resin adhesive paired with a 24 sq. in. (0.4 mm thick) genuine lambskin repair patch, ideal for reinforcing damaged areas from the underside.

 

Formulated specifically for hair-on cowhide, sheepskin, and natural hide rugs, the adhesive bonds securely while remaining elastic, preserving the hide’s natural drape, flexibility, and hair movement. The thin lambskin sub-patch provides strong structural support without creating ridges, hard spots, or visible repair lines.

 

Key Features & Benefits

 

  • Hair-On-Hide-Safe™ Adhesive – Flexible, water-based resin glue that dries soft and natural

  • Invisible Structural Repair – Reinforces rips and tears from beneath the hide

  • Genuine Lambskin Patch – 24 sq. in., ultra-thin 0.4 mm for seamless integration

  • No Stiffening or Hair Loss – Maintains natural softness, flexibility, and hair flow

  • Ideal for Hair-On Rugs & Hides – Suitable for cowhide, sheepskin, and hair-on leather décor

 

Typical Uses

 

  • Repairing rips, tears, and splits in hair-on hide rugs

  • Reinforcing weakened stress areas from the underside

  • Restoring structural integrity without altering appearance or feel

 

 

 

 

 

 

Hair on Hide Glue Repair Kit 2G by Leather Doctor is a water-based, soft compact resin adhesive glue with a 24 square inch, 0.4mm thickness lambskin for rip and tear repairs on hair-on hide. 

Leather, Nubuck and Suede adhesive for tears, rips, cat scratches, and bonding repairs.

  • Unlike other dry solvent-based glues, Glue 3D does not lift leather finishes.
  • Glue 3D works with Leather Patch 4S as a sub-patch or suede fibers as fillers.
  • Test for darkening effect before actual application for Nubuck and Suede.

1. Instruction - How to Repair a Cut-Through Leather with Glue 3D?

  1. Cut-through repairs utilize Patch 4S as a leather sub-patch, and this is bonded suede side to suede side.
  2. Where tension causes the leather to open, it is stretched to an overlapping position with some pulling help.
  3. Preferably, the Patch 4S is glued to one side before gluing the other.
  4. A blower helps to speed up the drying process.
  5. Holding the rip in position until fully cured is recommended.
  6. Filling gaps may be done with added matching coloring for aesthetics.

2. Instruction - How to Repair a Fresh and Clean Accident Leather Abrasion with Glue 3D?

  1. Abrasion, in most cases, will roughen up the leather structure with missing finishes.
  2. Any soiling is removed by brushing before applying Glue 3D to smooth the damage.
  3. A repeat application is necessary to build smooth skin back.
  4. Color matching is done according to the finish types.

3. Instruction - How to Repair a Prolonged Contaminated Leather Abrasion & Holes with Glue 3D?

  1. Constant abrasion with repeated compression may loosen and weaken the leather structure, compounded with a loss of fibers or missing parts. Repairs are done as follows:
  2. Degreaser 2.2 is recommended to remove surface and penetrated oil and grease soiling in conjunction with Acidifier 2.0 to remove foreign contamination.
  3. Hydrator 3.3 followed by Fatliquor 5.0 is recommended to rejuvenate the leather with softness and strength.
  4. Repairer R4 is recommended for shallow abrasions.
  5. Glue 3D commences with smoothening and filling with donor suede fiber.

4. Instruction -  How to Repair Hair-on-Hide Rug Rip or Tear Repair with Glue 3D?

  1. Rip or tear from aging or alkaline overexposure results from diminished fatliquor (ionic charged fat and oil).
  2. The hide needs to be cleaned (pH 1.5), rinsed (Acidifier 2.0), hydrated (Hydrator 3.3) and fatliquored (Fatliquor 5.0) before repairing, otherwise, the stiff hide may tend to tear again when flexed.
  3. The repair may be performed with Patch 4S, stitching, or suede fibers.

5. Instruction - How to Repair Hair-on-Hide Rug with Glue 3D and Patch 4S?

  1. A 1” Patch 4S strip sufficiently bonds a rip with approximately 1/2” on both sides.
  2. Glue 3D is applied to half an inch along the rip to penetrate, and the 1” Patch 4S is applied half sufficiently.
  3. The Patch 4S is placed and pressed accordingly.
  4. Let naturally dry with the hair drying option before repeating the other half and aligning accordingly.
  5. Let it overnight cure, and the hide is ready to flip over to the hair side.

6. Instruction - How to Repair Hair-on-Hide Rug with Glue 3D by Stitching and Donor Fiber?

  1. The hide is cross-stitched with a curved needle to hold the rip together.
  2. Glue 3D is applied about ½” on both sides of the rip.
  3. Donor fiber is scraped with Razor 60 from the thicker head and shoulder areas and applied over the stitching, camouflaging it.
  4. The repair is naturally dry or may be dried with a hair dryer.

Edited: May 27, 2024 | April 14, 2025 by Roger Koh

ype a description for this product here...

!