Aniline Wax Pull-up Leather Urine Odor Killer Kit AW5.uk

 Aniline Wax Pull-up Leather Urine Odor Killer Kit AW5.uk by Leather Doctor® is a Leather-Safe™ system to clean, rinse, pH balance, deodorize, hydrate, soften, and condition wax pull-up urine contamination.

 What is Wax Pull-up Leather?

• Wax pull-up leather is a high-quality, full-grain leather treated with waxes, designed to lighten in color when stretched, bent, or scratched.
• This "pull-up" effect creates a unique, rustic, and distressed appearance that develops a rich, fast patina.
• It is characterized by its soft, flexible, and often two-toned look, frequently used for footwear, bags, and furniture.  

1. Spots and discoloration:
Dark halos or cloudy fatty spew appear on the surface.

2. Persistent Odors:
An odor of ammonia or putrefaction develops, often exacerbated by ambient humidity .

3. Physical deterioration:
Leather can become dry, brittle, or conversely soft and sticky if the tanning agents are rejected by the fiber.

4. Contamination of the upholstery:
On furniture or car seats, urine often passes through the leather (especially if it is perforated) to soak the inner foam, making the odor almost impossible to eliminate without deep treatment.

• Uric acid and crystals:
• As urine dries, it forms uric acid crystals that bind to the leather fibers.
• These crystals trap odors and can release them again during periods of humidity.
• pH Imbalance:
• Leather naturally has an acidic pH (approximately 3.0 to 5.0). 
• Urine, through fermentation, becomes very alkaline (reaching a pH of 10.0).
• Which damages the protein fibers and can cause the leather to revert to a raw hide state.
• Ammonia:
• This decomposition product attacks the protective finishes of leather.
• Causing cracking, discoloration or a sticky/glutinous appearance.
• Urochrome:
• This is the pigment responsible for the yellow coloration that leaves persistent stains. 

 Kit AW5.uk Product Contents:

Available Sizes: 4oz / 8oz / 16oz fills
(Dilution required — distilled water) 

Water Required per standard Kit Size:

✅ 4oz fill → 685 g / 0.8 quart
✅ 8oz fill → 1369 g / 1.5 quarts
✅ 16oz fill → 2738 g / 3 quarts

(Shake well before use). 

Click the link for details:

✅ Leather Urine Cleaner 1.5
✅ Leather Acidifying Conditioner 2.0
✅ Leather Urine Odor Killer 2.1
✅ Leather Hydrating Conditioner 3.3
✅ Leather Fatliquoring Conditioner 5.0
✅ Leather Wax Pull-Up Conditioner 8.6
✅ Leather Scent Waxy Feel Conditioner W Plus
✅ Leather Eraser 4 
✅ Leather Brush 1 
✅ Foam 2
✅ Towel 5 

Optional 

✅ Leather Soft Cleaner 3.8
✅ Leather Rinsing Conditioner 3.0

 Instruction:

1️⃣ Urine Cleaning, and Rinsing:

Leather Urine Cleaner 1.5 +
Leather Acidifying Conditioner 2.0?

1. Surface stain is towel extracted until the towel shows clean.
2. Remaining is removed with Urine 1.5 using Brush 1 and towel extraction until the towel shows clean.
3. The remaining residue is rinsed off with Acidifier 2.0 using Brush 1 and towel extraction until the towel shows clean.
4. Absorbent towels are placed on both sides during extraction to reduce abrasion to the surface and stain is absorbed on the reverse side.
5. The surface is detected for any tackiness and should return to a healthy squeaky feel once the leather is well pH balanced with further dwelling.
6. Continue extension cleaning and rinsing.

Optional General Cleaning, and Rinsing:

Leather Soft Cleaner 3.8 +
Leather Rinsing Conditioner 3.0?

1. Soft 3.8 is applied and clean over the stain to the entire panel without a visible dry edge using Brush 1 and towel extraction until the towel shows clean.
2. Rinse 3.0 is applied and follow Soft 3.8 over the stain to the entire panel without a visible dry edge using Brush 1 and towel extraction until the towel shows clean.
3. Continue with deodorizing.  

2️⃣ Deodorizing:  

Leather Urine Odor Killer 2.1?

1. Urine 21 is applied and soaked until naturally dry.
2. The sour odor dissipates when the solution is completely dried.
3. Inspect for satisfaction otherwise repeat as necessary.

3️⃣ Hydrating:

Leather Hydrating Conditioner 3.3?

1. Hydrator 3.3 first step is to achieve a deep penetration to help purge out foreign contamination to be towel extracted and is repeated until the towel shows clean.
2. This penetrated stain-removing process continues with hydrating until complete satisfaction during a dry inspection.
3. Hydrator 3.3 second step is to relax stiff leather and redistribute the migrating leather constituents, it is applied to the entire section without a dry edge, towel extracted, and ready for fatliquoring.

4️⃣ Fatliquoring: 

Leather Fatliquoring Conditioner 5.0? 

1. Fatliquor 5.0 is applied, brushed, and distributed until the leather is saturated.
2. Continuous application is repeated each round water contents evaporate until saturation.
3. The leather is left for natural drying for extra softness.
4. The darkening effect is stretched with a spoon to lighten up.

5️⃣ Rejuvenating:

Leather Wax Pull-Up Conditioner 8.6?

1. Wax 8.6 is applied, spread evenly, and saturated sufficiently with a horsehair brush to produce a darkening effect.
2. Allow at least 8 hours of natural drying time or until crystalline is apparent.
3. The wax deposit is activated with a heat blower or hairdryer to a natural gloss luster.

6️⃣ Conditioning:  

Leather Scent Waxy Feel Conditioner W Plus?

1. Conditioner W Plus is applied and spread with a paper towel.
2. Leather is ready to use when dry.

 Updated February 24, 2026 by Roger Koh