Bicast Leather Sticky Care System™ (B2 → B3 → B7)
Bicast leather stickiness is a progressive condition, not a one-time problem.
Leather Doctor® solves it through a 3-level modular system, based on severity:
Level 1 – Prevention & Early Stickiness
B2 Cleaning System
Level 2 – Active Deterioration
B3 Degreasing System
Level 3 – Structural Breakdown (Hydrolysis)
B7 Refinishing System
How the System Works (Cycle of Care)
B2 maintains → prevents buildup
B3 corrects → stops deterioration
B7 restores → rebuilds structure
Then returns to:
B2 for maintenance
Key Understanding
Sticky Bicast is not dirt — it is polyurethane failure.
Each system targets a different stage:
| Condition | Feel | Required System |
|---|---|---|
| Light tackiness | Slight drag | B2 |
| Noticeable stickiness | Grippy / dull | B3 |
| Soft / spongy / gummy | Surface deforms | B7 |
Bicast Leather Sticky Problem Guide
- 1️⃣ Which Kit Do I Need?
- 2️⃣ How to Choose the Right Bicast Leather Repair Kit?
- 3️⃣ Why Some Sticky Leather Repairs Fail (And How to Avoid It)?
Bicast Leather Sticky Cleaning (Kit B2) by Leather Doctor® is a Leather-Safe™ innovative system developed to keep Bicast leather from the potential stickiness problem.
Why Bicast Leather Develops a Sticky Problem?
Polyurethane (PU) Degradation:
- It is the PU layer that is the problem.
- Unlike genuine leather, which breathes, this plastic layer traps substances on its surface.
Oils, Grease and Sweat Reaction:
- This is one of the most common factors.
- Oils, Grease and Sweat penetrate the protective film and trigger polymer degradation, which makes the finish sticky.
Alkaline Cleaners:
- This is a crucial point.
- Overly aggressive cleaners (often alkaline) can strip away the protective agents of the PU,
- Thus accelerating its oxidation.
Hydrolysis:
- The reaction of polyurethane with ambient humidity.
- Atmospheric moisture chemically breaks down the plastic molecules,
- Creating this irreversible "gummy" texture.
Plasticizers Migration:
- The stickiness is often due to softening agents (plasticizers) which "rise"
- To the surface of the plastic film over time or under the effect of heat, creating a sticky residue.
Kit B2 is designed to prevent and control early-stage stickiness before topcoat damage occurs.
✅ When to Use:
- Slight tackiness
- Early residue buildup
- Routine maintenance
✅ What It Does:
- Removes sweat, oils, and residues
- Restores healthy pH balance
- Maintains a dry, non-sticky feel
Kit B2: 4-Step System
Step 1 – Sticky 1.5
Cleans contamination.
Step 2 – Rinse 3.0
Rinse contamination.
Step 3 – Acidifier 2.0
Stabilizing stickiness
Step 4 – Conditioner B
Reduces stickiness
Upgrade Trigger
If stickiness:
- Returns quickly
- Feels heavier or uneven
Upgrade to B3 Degreasing System.
Kit Contents
Add distilled water accordingly before use.
Click links for details:
Kit B2 – Simplified Instruction Flow
1️⃣ Cleaning (Sticky 1.5)
Apply Sticky 1.5 (1:12 dilution)
Agitate with Brush 1 and assist with Eraser 4 where needed
→ Work into the grain to loosen residues
Towel extract thoroughly (lint-free)
→ Turn towel frequently until it shows clean
2️⃣ Rinsing (Rinse 3.0)
Apply Rinse 3.0 (1:40 dilution)
Agitate with Brush 1 and Eraser 4
→ Flush out suspended residues
Towel extract thoroughly
→ Repeat until towel shows clean
3️⃣ Acidifying (Acidifier 2.0)
Apply Acidifier 2.0 (1:25 dilution)
Agitate with Brush 1 and Eraser 4
→ Neutralize and lift remaining residues
Towel extract thoroughly
Repeat cycle if needed until tackiness is gone
➡️ Otherwise upgrade to Degreasing (Kit B3)
4️⃣ Conditioning (Conditioner B)
Apply Conditioner B (1:19 dilution)
Spread evenly and allow to dry
Leaves a smooth, non-stick finish
MASTER PRINCIPLE
Dwell softens — agitation releases — extraction removes