Hydrator 3.3 & Fatliquor 5.0 FAQ

1. Why Hydrate Before Fatliquoring?

In the fatliquoring process, hydrating and softening leather are equally important to ensure optimal absorption and distribution of fatliquor. Hydrator 3.3 plays a crucial role by:

Relaxing and opening up inter-fibrillary spaces, allowing better penetration.
Facilitating and redistributing colloidal water movement for even hydration.
Protonating and balancing the pH to restore the leather’s ionic integrity.
Removing excess surface remnants, ensuring a residue-free finish for better fatliquor bonding.

Hydrating first ensures that fatliquor can properly replenish the leather’s structure, enhancing softness, strength, and longevity.

2. What is the usage ratio between Hydrator 3.3 and Fatliquor 5.0?

For severe dryness, the recommended weight ratio of Hydrator 3.3 to Fatliquor 5.0 is 2:1.
To recondition 100g of dry leather (with less than 1% moisture content) back to the modern tannery standard of 14% moisture content, you would need: 160g of Hydrator 3.3 and 80g of Fatliquor 5.0.
This ratio ensures effective hydration and fat replenishment to restore the leather's softness, flexibility, and durability.

3. How to Inspect for Leather Surface Tension with Hydrator 3.3?

Leather surface tension refers to the resistance of the leather's surface to the penetration of liquids.
If the surface tension is too high, liquids may not be absorbed evenly, leading to uneven absorption and undesirable blotchiness.
Maintaining the right surface tension is crucial for ensuring consistent application of conditioners, dyes, and other treatments, preventing uneven or patchy results.

To inspect for leather surface tension, follow these steps:

Lightly mist-spray the leather surface with Hydrator 3.3.
Wipe the surface with a lint-free towel to ensure even moisture distribution.
Inspect the leather at an angle for even darkening, which indicates consistent surface tension.

An even darkening appearance suggests that the leather has a uniform surface tension, allowing for proper liquid absorption and treatment.

4. How to Remove Fatliquor Surface Residue with Hydrator 3.3?

To remove unwanted fatliquor surface residue (which may appear sticky and shiny) from leather:

Apply Hydrator 3.3 to the surface where the residue is present.
The suspended residue will appear cloudy.
Brush the surface with Hydrator 3.3, working it into the leather.
Continue until the liquid turns crystal clear, indicating the residue has been fully absorbed.

This process ensures the leather is left with a smooth, residue-free finish, restoring its natural appearance.

5. What is Leather Stiffness?

Leather stiffness occurs when the fibers within the leather structure become stuck together after being exposed to moisture and then drying out.
This can lead to a loss of flexibility and suppleness.
Severe stiffness is often the result of fatliquor leaching out due to water damage and exposure to fast-drying heat, which accelerates moisture evaporation and causes the leather to lose its natural oils.

It's essential to handle stiff leather with care to avoid cracking or further damage, ensuring it retains its strength and durability.

6. What is an Unnatural Crease in Leather?

An unnatural crease in leather refers to a wrinkle or fold that develops when the leather's fiber structure collapses due to a diminished fatliquor (fat and oil) content.

This loss of natural oils and fats causes the leather to become stiff and brittle, resulting in visible creases that are not typical of the leather's normal texture.
Unnatural creases can be a sign of drying or insufficient conditioning, and they can negatively impact the leather's appearance and durability.

7. How to Restore an Unnatural Crease with Hydrator 3.3?

To restore an unnatural crease in leather:

Saturate the leather with Hydrator 3.3 to an optimal level.
Gently press the leather between your fingers and thumb - moisture should ooze out if the leather has been properly saturated.
Allow the leather to hydrate and soften with fatliquoring, which will help relax the crease and restore its natural appearance.

This process helps replenish lost moisture, rejuvenating the leather and reducing the appearance of unwanted creases.

8. How to Relax the Leather Thickness with Hydrator 3.3?

To relax the leather thickness:

Saturate the leather thoroughly with Hydrator 3.3 to ensure it is well-moisturized.
Leave the leather to dwell for up to 72 hours, allowing it to absorb the moisture fully.
Periodically top up with Hydrator 3.3 if the surface begins to dry out during the process.
Depending on the environmental conditions, it is recommended to use Mold Killer 3.6 to prevent mold and mildew growth during the long dwell time.

This process softens the leather, helping to relax its thickness and restore its flexibility and comfort.

9. How to Work out the Unnatural Crease with Hydrator 3.3?

To work out an unnatural crease in leather, follow these steps:

Saturate with Hydrator 3.3: Begin by applying Hydrator 3.3 to the affected area to ensure the leather is properly conditioned and softened. This will help loosen the fibers, making it easier to manipulate the crease.
Stake the Leather: Use a leather staking tool to apply pressure along the crease gently. This helps to break down the stiffness of the leather and start working the crease out.
Stretch the Leather: Gently stretch the leather around the crease, pulling it in different directions to encourage the fibers to relax and realign. Be careful not to overstretch, as this can cause damage.
Massage the Crease: With your hands, apply a gentle massaging motion along the crease. This will further help to loosen the fibers and make the crease less noticeable.
Cross-Flexing: Gently flex the leather back and forth across the crease, which helps to manipulate further and soften the area, making the crease less pronounced.
Repeat as Needed: Continue to apply Hydrator 3.3 and repeat the staking, stretching, massaging, and cross-flexing process until the leather is relaxed and the unnatural crease is less visible or removed.

This process will gradually relax the leather and work out the crease, but it’s essential to proceed slowly and be patient, especially with delicate or high-end leather materials.

10. When should you begin Fatliquoring after working out the Unnatural Crease?

Fatliquoring should begin after you have removed the unnatural crease and excess moisture from the leather.

Here's the sequence:

Work out the crease: First, use the methods of staking, stretching, massaging, or cross-flexing, along with the continuous saturation of Hydrator 3.3, to relax the leather and work out the crease.
Dry the leather: Once the crease is worked out, use a dry towel to extract the excess moisture from the leather. You can just wipe the surface until the towel no longer picks up moisture, but the leather should still feel damp with Hydrator 3.3.
Begin Fatliquoring: At this point, when the leather is still slightly damp, you can begin the fatliquoring process. This ensures the leather retains adequate moisture while being replenished with oils, which helps restore its softness, flexibility, and durability.
Complete the drying: After fatliquoring, allow the leather to dry naturally, and it should maintain a supple and restored appearance, free of creases.

Fatliquoring before the leather is fully dry is crucial because it helps maintain the leather's moisture balance and ensures a more effective reconditioning of the leather fibers.

11. When should you clean up Fatliquor Surface Residue?

You should clean up the Fatliquor surface residue after the leather has been left to dry slowly, and when any surface shine residue has been absorbed further into the leather.

Here's the process:

Allow the Leather to Dry Slowly: After applying the Fatliquor, let the leather dry at room temperature. This slow drying helps the Fatliquor penetrate deeper into the leather and prevents any excessive surface residue.
Brush the Leather: Once the leather is dry, use a soft brush further to drive the Fatliquor into the leather's structure. This step helps to ensure that any surface shine residue is absorbed and doesn't remain on the surface.
Use Hydrator 3.3: In conjunction with the brushing, continue to apply Hydrator 3.3. The Hydrator helps in breaking down any residual fatliquor that may be left on the surface and works to smooth and hydrate the leather.
Extract Residue with a Cotton Towel: As the leather dries and any surface shine or milky residue becomes more apparent, gently wipe it off with a clean cotton towel. Continue wiping until the towel shows dry, indicating that the residue has been fully extracted and the leather is clear.

By following this process, you ensure that no greasy or shiny residue remains on the surface, leaving the leather with a soft, matte, and well-conditioned finish.

12. How to Soften Drying Leathers after Fatliquoring?

To soften drying leathers after fatliquoring, follow these steps:

Allow Leather to Dry Slowly: After fatliquoring, let the leather dry at room temperature, but don’t let it dry completely before working on it.
Manipulate the Leather While Damp: Once the leather is slightly damp (but not wet), you should apply physical techniques to further soften it:

Staking: Gently use a staking tool to soften and relax the leather fibers.
Stretching: Gently stretch the leather to promote flexibility and reduce stiffness.
Massaging: Use your hands to massage the leather, working the fibers and increasing suppleness.
Cross-Flexing: Flex the leather back and forth to further encourage the fibers to soften.
Repeat the Manipulation: Continue to stake, stretch, massage, and cross-flex the leather periodically until it reaches the desired softness. This process should be done before the leather is completely dry, as it’s easier to manipulate and soften when it still contains some water.

Allow Leather to Dry Completely: After these manipulations, allow the leather to finish drying naturally. The leather will be softer, more supple, and ready for use with improved flexibility and feel.

By working the leather while it’s still slightly damp from fatliquoring, you enhance its softness and suppleness, giving it a luxurious finish.

13. What is Leather Structure Cleaning with Hydrator 3.3?

Leather structure cleaning refers to the process of removing deep-set soiling from the leather’s internal structure and bringing it to the surface for easier extraction.

Here’s how it works:

Suspending Soiling: The goal of leather structure cleaning is to lift and suspend the dirt, oils, and other contaminants that have penetrated deep into the leather fibers. This is achieved by using a specialized cleaner or conditioning solution that effectively loosens and breaks down the soil without damaging the leather.
Wicking Process: Once the cleaning solution has penetrated and suspended the soiling, it’s allowed to "wick" or move upwards to the surface of the leather. This is typically done by gently agitating the leather (with tools like brushes or hands), allowing the contaminants to move towards the outer layers of the leather.
Towel Extraction: After the soiling has been brought to the surface, a clean, dry towel is used to extract the suspended dirt and moisture. The towel is wiped over the leather to gently remove the contaminants without damaging the surface.

This process helps to clean the deeper layers of the leather while maintaining its structure and integrity, leaving it refreshed and free from embedded dirt or oils.

14. How does Leather Structural Cleaning Work with Hydrator 3.3?

Leather Structural Cleaning works by using specific leather-safe products and techniques to penetrate, suspend, and remove embedded soiling within the leather.

Here's how it works step by step:

Penetration and Lubrication: To clean deeply embedded soiling, a leather-safe product like Hydrator 3.3 is applied. This product helps penetrate the leather structure and lubricates the fibers, which allows the dirt and oils within the leather to become loosened and suspended in the liquid.
Suspending the Soiling: Once the Hydrator 3.3 penetrates the leather, it works to suspend the soiling (dirt, oils, grime, etc.) within the leather structure. The hydrator essentially lifts the soil from the deeper fibers and holds it in suspension, making it easier to move toward the surface.
Wicking Process: After the soiling is suspended, you need to hydrate the leather sufficiently to allow a wicking process. This process helps draw the suspended soil to the surface. It’s important that the leather is properly hydrated with enough liquid to allow for effective wicking.
Towel Extraction: Once the soiling has moved to the surface, a clean, dry towel is used to absorb and extract the suspended soiling. This helps remove the contaminants from the leather without causing damage.
Repeat the Hydration and Extraction: Since each wicking process can only carry so much soiling, multiple cycles of hydration and towel extraction are necessary. This repeated process ensures that all the soiling is removed from the leather’s structure, leaving it clean and restored.

By carefully repeating this process, you ensure that the leather is thoroughly cleaned from the inside out, without damaging the material or affecting its integrity. It also helps to maintain the leather's softness and flexibility while effectively removing embedded dirt.

15. How to Remove Deep Suspended Soiling with Hydrator 3.3?

To remove deep suspended soiling from leather, follow these steps:

Apply Hydrator 3.3: Before removing suspended soiling, ensure that the leather has been properly hydrated using a leather-safe cleaner like Hydrator 3.3, which helps suspend the soiling within the leather structure.
Position the Absorbent Towel and Spatula: Place a clean, absorbent towel over the soiled area of the leather. Use a smooth spatula or similar tool to gently press down on the towel. The spatula helps apply even pressure without causing abrasion to the leather surface.
Squeeze Extraction: Slowly and gently press the spatula down onto the towel, helping to extract the suspended soiling into the towel. The pressure should be firm but not forceful, as you want to reduce the risk of abrasion or damage to the leather.
Check the Towel: After squeezing the towel, check the towel to see if the extracted soiling has transferred. If the towel shows clean, then most of the suspended soiling has been removed. If the towel is still showing dirt, repeat the squeezing and extraction process.
Repeat as Needed: You may need to repeat this process multiple times, especially for deeply embedded soiling, until the towel remains clean after each extraction. By using the squeezing extraction method with the towel and spatula, you can effectively and gently remove suspended soiling without causing damage to the leather.

This technique ensures that the leather is thoroughly clean, while its texture and integrity are kept intact.

16. When to Begin Fatliquoring after Leather Structural Cleaning?

Fatliquoring should begin after leather structural cleaning and while the leather is still slightly damp.

Here’s the ideal sequence for timing:

Complete Leather Structural Cleaning: Finish the cleaning process by suspending and extracting the soiling, ensuring that the leather is clean and free of dirt and oils.
Leave Leather Slightly Damp: After completing the cleaning and towel extraction, the leather should still be slightly damp from the hydration process, but not overly wet. This moisture is important for the fatliquoring process to be effective.
Start Fatliquoring: Apply fatliquor (a conditioning oil or fat replenishing solution) at this point, as the damp leather will better absorb the fats and oils. Fatliquoring at this stage helps restore the leather's natural oils, ensuring it stays supple, flexible, and properly nourished.
Allow the Leather to Dry: After applying the fatliquor, allow the leather to dry slowly, which helps the leather retain its softness and natural suppleness. Avoid drying it too quickly or using excessive heat, as this can cause the leather to lose its moisture balance.

Starting fatliquoring while the leather is still slightly damp ensures optimal absorption of oils, which helps maintain the leather's integrity and prevents it from becoming dry or brittle.

17. How Fatliquoring is done on Damp Leather?

Fatliquoring on damp leather is a careful process that ensures the leather absorbs the necessary oils for softness, flexibility, and durability.

Here’s how it’s done:

Apply Fatliquor 5.0: Start by applying Fatliquor 5.0 to the slightly damp leather. The dampness helps the fatliquor to penetrate and absorb more effectively. Apply the fatliquor evenly over the leather’s surface.
Distribute Evenly: Use a clean cloth or applicator to ensure the fatliquor is evenly distributed across the entire surface. This helps achieve uniform absorption throughout the leather.
Allow Saturation: Let the leather absorb the fatliquor until it is saturated. The leather should take in the fatliquor without excess liquid pooling on the surface.
Slow Natural Drying: Allow the leather to dry slowly at room temperature. Avoid using excessive heat, as this can damage the leather or cause uneven drying.
Repeat the Process: Once the leather is almost dry, apply Fatliquor 5.0 again, following the same steps: apply, distribute, allow absorption, and then let it dry naturally. Repeat this cycle several times.
Stop When Leather Absorbs No More: The process is complete when the leather no longer absorbs fatliquor, meaning it has reached its saturation point and cannot take in any more oils.

This gradual process helps to restore the leather’s natural oils, keeping it soft, pliable, and resilient. The slow drying and repeated application ensure that the leather receives the necessary fat content to maintain its suppleness and overall quality.

18. How to Remove Fatliquor Surface Residue with Hydrator 3.3?

To remove fatliquor surface residue, follow these steps:

Activate with Hydrator 3.3: Apply Hydrator 3.3 to the leather surface where there is any unwanted fatliquor residue. The Hydrator helps to activate and break down the milky residue, allowing it to be re-absorbed into the leather structure.
Wait for the Residue to Turn Clear: As the Hydrator 3.3 interacts with the residue, it will start to turn the milky residue crystal clear. This indicates that the fatliquor is being reabsorbed into the leather fibers, and the excess is being dissolved.
Wipe with a Cotton Towel: Once the residue has turned clear, use a clean, dry cotton towel to gently wipe the surface. The goal is to remove any remaining surface moisture and excess fatliquor.
Check the Towel: Continue wiping with the cotton towel until it shows dry, indicating that all surface moisture and residue have been fully extracted.

By following this process, you effectively remove any unwanted fatliquor residue, leaving the leather clean, dry, and with a restored, supple finish. The re-absorption ensures that the leather retains the necessary conditioning oils without leaving a greasy or shiny surface.

19. How to Soften Drying Leather after Cleaning up with Hydrator 3.3?

To soften drying leather after cleaning up with Hydrator 3.3, follow these steps:

Ensure Leather is Slightly Damp: After cleaning the leather with Hydrator 3.3, ensure the leather is still slightly damp, but not overly wet. The leather should be in a state where it's still flexible but not dripping.
Stake the Leather: Use a leather staking tool to gently soften the leather. Staking applies a mild pressure to break down stiffness and encourage the leather fibers to relax, making the leather more supple.
Stretch the Leather: Gently stretch the leather in different directions to increase its flexibility. Be careful not to overstretch, as this can cause damage. Stretching helps to reduce tightness and soften the leather further.
Massage the Leather: Use your hands to massage the leather gently. Focus on the areas that feel stiff or less pliable. Massaging helps redistribute moisture and softens the leather fibers.
Cross-Flex the Leather: Flex the leather back and forth to help loosen it up. This is especially effective for areas that have become stiff or hard during the drying process. Cross-flexing helps promote even flexibility throughout the material.
Repeat as Necessary: Continue staking, stretching, massaging, and cross-flexing the leather until you reach the desired level of suppleness. This process should be done before the leather is completely dry to ensure it softens properly.
Allow Leather to Dry: Once you've achieved the desired softness, allow the leather to dry naturally at room temperature. The result will be leather that is soft, supple, and free from stiffness.

By manipulating the leather while it's still damp, you enhance its flexibility and softness, ensuring it dries with the desired suppleness and feel.

20. How to Restore Sun-Fading Leather with Hydrator 3.3 + Fatliquor 5.0?

Sun-fading (also known as sun bleaching or dye fading) occurs when leather loses its color due to prolonged UV light exposure.

To restore faded leather, follow these steps:

Assess the Leather:

Check if the leather is dye-through (meaning the color is embedded throughout the leather, not just on the surface). * If the leather is dyed-through, hidden dyestuff within the structure may be reactivated.

Reactivate the Hidden Dye with Hydrator 3.3:

Apply Hydrator 3.3 generously over the faded areas.
Allow the Hydrator to fully penetrate the leather and wick up the dyestuff from the deeper layers back to the surface.
Let the leather dwell in a hydrated state, covering it with plastic wrap if needed to prevent evaporation.

Redistribute the Color:

Use gentle massaging, flexing, or brushing techniques to encourage even dye movement.
If necessary, repeat the hydration process until the color appears more uniform.

Set the Dye with Acidifier 2.0:

Apply Acidifier 2.0 to stabilize and rebond the dye molecules to the leather fibers.
This helps prevent further fading and ensures the color stays intact.

Condition with Fatliquor 5.0:

Once the color is restored, apply Fatliquor 5.0 to replenish lost oils and enhance suppleness.
This prevents future drying and cracking caused by UV exposure.

Re-Dye if Needed(For Severe Fading):

If the Hydrator method does not fully restore the color, a professional leather dyeing process may be required to reintroduce lost dyestuff.

This method naturally restores faded leather by drawing out hidden dye, without artificial redyeing, and prolongs leather life.

21. How to Reverse Transfer Penetrated Suspended Soiling with Hydrator 3.3?

Reverse transfer of penetrated suspended soiling is a technique that uses capillary action or wicking to draw out deeply embedded soiling from within the leather fibers to the surface. This method is commonly used after specialty cleaning to ensure a thorough soiling removal without damaging the leather.

Steps to Reverse Transfer Penetrated Suspended Soiling:

Hydrate the Leather with Hydrator 3.3:

Apply Hydrator 3.3 generously to the affected area to fully hydrate the leather structure.
This process helps loosen and suspend the remaining soiling within the leather fibers.

Wettable Towel Preparation:

Use a clean wettable cotton towel soaked with Hydrator 3.3.
Wring out the excess liquid so the towel is damp, not dripping.

Place the Towel Over the Leather:

Lay the damp towel flat over the affected area.
Ensure there is full contact between the towel and the leather surface.

Reverse Transfer by Capillary Action:

Leave the towel on the leather for several hours or overnight.
The wicking process will draw out the suspended soiling from within the leather fibers, transferring it onto the towel.

Inspect and Repeat:

Check the towel for visible soil marks.
If the towel shows soiling, repeat the process with a fresh towel until no more soiling transfers.

Final Cleaning and Conditioning:

After the reverse transfer is complete, wipe the surface with a clean cotton towel.
Rehydrate the leather with Hydrator 3.3 if needed, then follow up with Fatliquor 5.0 to restore softness and suppleness.

Why This Works:

The capillary action helps draw out suspended soiling naturally without aggressive scrubbing or abrasion.
This technique is especially effective for delicate leather types like aniline and suede, where embedded soiling needs to be removed gently.
By using this reverse transfer method, you can achieve a deep and thorough cleaning while preserving the leather’s structure and appearance.

22. How the Reverse-Transfer Technique Works?

The reverse-transfer technique uses hydration and capillary action to draw out suspended soiling deep from within the leather structure. This process relies on Hydrator 3.3 to facilitate colloidal water movement within the leather’s inter-fibrillary spaces, allowing soiling to wick to the surface and be absorbed into a wettable towel.

Step-by-Step Process:

Hydrate and Saturate the Leather:

Apply Hydrator 3.3 generously to the affected area.
Allow it to fully saturate the leather, ensuring deep penetration into the inter-fibrillary spaces (the tiny gaps between the leather fibers).
This process loosens embedded soiling and suspends it in the leather’s moisture content.

Encourage Capillary Action:

The colloidal water movement within Hydrator 3.3 helps lift the suspended soiling upwards.
The soiling begins to migrate toward the leather’s surface as the leather remains hydrated.

Apply a Wettable Towel:

Place a damp, wettable towel (soaked with Hydrator 3.3) over the affected area.
Ensure full contact between the towel and the leather.

Wicking Process - Soiling Transfers to the Towel:

As moisture naturally evaporates, the capillary action wicks the soiling particulates out of the leather structure.
Instead of resettling on the leather surface, the soiling gets trapped within the towel fibers.

Peel Off and Inspect:

After several hours (or overnight for deep soiling), peel off the towel to check for transferred soiling.
If visible soiling is present on the towel, repeat the process with a fresh towel until no more transfer occurs.

Final Leather Care:

Once the soiling is fully removed, wipe the leather with a dry towel to remove any remaining moisture.
If necessary, rehydrate with Hydrator 3.3 and condition with Fatliquor 5.0 to restore the leather’s suppleness.

Why This Works:

No Brushing or Erazing Needed: Unlike scrubbing, this technique removes deep-set soiling without damaging delicate leather fibers.
Effective for Stubborn Stains: Works well for ink stains, dye transfer, and deep-seated dirt in porous leathers like aniline and suede.
Prevents Re-Deposition: By trapping the soiling in the towel, it ensures the dirt doesn’t resettle on the leather.
This gentle yet powerful method ensures deep cleaning while preserving the natural beauty of leather.

23. How to Remove Fatliquor Residue from the Leather Surface?

Fatliquor 5.0 replenishes essential fat and oil content within the leather structure to restore suppleness and flexibility. However, any unabsorbed surface residue can alter the leather’s original luster and attract dirt. To maintain a clean, even finish, excess fatliquor must be removed properly.

Step-by-Step Process to Remove Fatliquor Residue:

Identify Residue on the Surface:

Look for any shiny or sticky areas where excess fatliquor has remained on the leather surface.
If the residue appears milky or cloudy, it indicates unabsorbed fatliquor.

Activate Residue with Hydrator 3.3:

Lightly spray Hydrator 3.3 over the affected areas.
As Hydrator 3.3 interacts with the residue, any milky appearance will turn crystal clear, signaling reabsorption into the leather structure.

Brush to Work the Residue In:

Use a soft-bristled leather brush (e.g., horsehair or detailing brush) to work the Hydrator 3.3 gently into the leather.
This helps distribute the fatliquor evenly and prevents surface buildup.

Wipe Off Excess with a Lint-free Towel:

Immediately wipe the surface with a clean, dry towel to remove any remaining moisture or residue.
Continue wiping until the towel remains completely dry after each pass.

Let the Leather Dry Naturally:

Allow the leather to air dry slowly at room temperature.
Avoid heat sources (like hair dryers) to prevent unwanted stiffening.

Why This Works:

Prevents Residue Buildup – Ensures fatliquor is absorbed into the leather rather than sitting on the surface.
Maintains Leather’s Original Luster – Keeps the finish clean and natural-looking without excessive shine or stickiness.
Enhances Leather Suppleness – Proper absorption ensures even softness without attracting dirt.

By following this method, excess fatliquor is removed while preserving the leather’s integrity, smooth finish, and long-term durability.

24. How to Restore Water-Damaged Shrinkage in Leather with Hydrator 3.3 + Fatliquor 5.0?

Leather water shrinkage occurs when leather is water-damaged and exposed to excessive heat, causing the natural fatliquor (fat and oil) to evaporate. This results in stiff, shrunken, and brittle leather fibers that can easily crack or tear. To restore suppleness and flexibility, the leather must be rehydrated, relaxed, and replenished with fatliquor.

Step-by-Step Leather Shrinkage Restoration Process:

Rehydrate and Relax the Leather with Hydrator 3.3:

Apply Hydrator 3.3 liberally over the affected shrunken areas.
Ensure deep penetration by massaging it into the leather with a soft brush or sponge.
Allow it to soak in for several hours (or overnight for severe shrinkage).
Gently stretch, massage, or stake the leather to help relax the stiff fibers.

Hydrator 3.3 softens and expands the inter-fibrillary spaces, allowing the fibers to regain flexibility.

Replenish Leather’s Natural Fats and Oils with Fatliquor 5.0:

Once the leather is still damp (not fully dry), apply Fatliquor 5.0 in multiple light coats.
Massage and distribute evenly to ensure deep absorption.
Let the leather slowly air dry, repeating the application until the leather absorbs no more.

Fatliquor 5.0 restores essential fats and oils, preventing leather from re-shrinking as it dries.

Final Hydrator 3.3 Rinse to Remove Surface Residue:

After drying, some excess fatliquor may remain on the surface.
Lightly spray Hydrator 3.3 and gently brush or wipe to remove any sticky residue.
Wipe dry with a cotton towel until no more residue is visible.

This step ensures even absorption and prevents surface stickiness.

Why This Works:

Restores Flexibility – Hydrator 3.3 rehydrates the stiff fibers, relaxing shrinkage.
Prevents Cracking – Fatliquor 5.0 restores the leather’s natural softness and elasticity.
Protects Against Future Heat Damage – Replenishing fats and oils keeps leather resilient and prevents further shrinkage.

This process revives shrunken leather and restores its original suppleness and strength.